Alpinestar Tech 10 Supervented Off Road Motocross Boot 2021 - White
The benchmark boot in Motocross, the Tech 10 Supervented boot further advances the innovations that make it the most technical motocross boot ever. Featuring two inlet ports on the front, a ventilated shin plate, perforated padding and extensive mesh sections, the Tech 10 Supervented has been designed for maximum airflow through the boot’s front and effective heat exchange. The new mesh inner bootie boasts a 3D Higher Spring insole which uses air channels within the sole for optimal levels of ventilation, while also creating a cushioning effect for enhanced levels of comfort. There is also a new sole with an extended honeycomb design for superior grip and feel on the bike’s pegs, especially in wet and muddy conditions.
Construction
• Construction uses a highly breathable, perforated microfiber.
• TPU features is combined with ventilation zones and a new air flow system sole for breathability and superior ventilation.
• Two large inlet ports on front of boot with exhausts at back for optimised levels of airflow and heat exchange.
• Co-injected for strength and structure, the exclusive TPU and rubber compound panels provide superb levels of grip contact, durability and heat resistance.
• The contoured calf protector ergonomically wraps around the rear leg and is constructed from a dual density compound rear blade system to offer progressive dampening of excessive torsional forces.
• Shin plate features a new anatomic design for reduced surface area and weight-saving.
• Completely re-designed sole with proprietary grip sculpturing to improve foot-peg performance, grip and mud and water run-off. Exclusive dual compound sole is seamlessly integrated to the multi-density foot base structure with built-in support. The sole offers superior durability, grip and feel while riding, and improved performance on the shifter.
Key Features
• Innovative, lightweight upper combines advanced lightweight microfiber with an impact and abrasion resistant TPU shell.
• The foot shell features five different compounds in a single lightweight piece to offer strength while maintaining flexibility and structural integrity. The foot shell incorporates heel and toe protection and is highly resistant against abrasion and impact while adding to the boot’s overall durability. The foot shell also includes an integrated shank for support and structural integrity.
• Frontal protection features a dual closure system with an internal microfiber flap, plus hook and loop fasteners for a precise fit closure attached securely with a micro-adjustable, easy to operate, lightweight buckle.
• The shin incorporates a unique TPU blade system engineered to prevent frontal hyper-extension and offer greater flex control.
• Soft microfiber gaiter helps seal out excessive water and dirt entry, while the 3D mesh lining ensures improved air circulation and comfort.
• 3D mesh lining incorporates anti-sliding suede on heel area to keep the foot located inside the boot.
• Highly ventilated perforated padding for optimised ventilation and airflow.
• Perforated footbed for additional cooling.
• The central sole insert features a micro grip and side hooking grip design. It is easily replaceable and Alpinestars offers a full sole replacement and boot repair service.
Protection
• Built into the Tech 10’s unique and lightweight single-piece co-injected foot chassis is the patented Dynamic Heel Compression Protector (DHCP), an innovative safety feature which includes a fully integrated collapsible heel area with expanded polyfoam to absorb high impact energies during a crash. DCHP features a directional impact protection system which significantly reduces the effect of excessive, potentially injury-causing energy being transferred to the ankle and lower leg. DHCP has been developed and tested in the demanding circuits of professional Supercross and Motocross.
• New performance double pivot motion control system features: - Medial and lateral double pivot system for improved levels of flexibility and precision control.- Engineered bi-density front flexion control is strategically positioned over the mesh area, combined with a dual front blade system and shock absorber insert to offer mechanical progressive force release to dampen and absorb impact energies.- Re-designed dual density TPU rear blade system is engineered to prevent hyper-extension while offering improved flex control and impact resistance.
• Evolutionary new shin plate design with ventilation windows strategically positioned to allow more ventilation without compromising the impact protection.
• 3D Higher Spring insole creates an effective cooling system using air channels within the sole for optimal levels of ventilation, while also creating a cushioning effect for enhanced levels of comfort.
• According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: CE EN13634.
The benchmark boot in Motocross, the Tech 10 Supervented boot further advances the innovations that make it the most technical motocross boot ever. Featuring two inlet ports on the front, a ventilated shin plate, perforated padding and extensive mesh sections, the Tech 10 Supervented has been designed for maximum airflow through the boot’s front and effective heat exchange. The new mesh inner bootie boasts a 3D Higher Spring insole which uses air channels within the sole for optimal levels of ventilation, while also creating a cushioning effect for enhanced levels of comfort. There is also a new sole with an extended honeycomb design for superior grip and feel on the bike’s pegs, especially in wet and muddy conditions.
Construction
• Construction uses a highly breathable, perforated microfiber.
• TPU features is combined with ventilation zones and a new air flow system sole for breathability and superior ventilation.
• Two large inlet ports on front of boot with exhausts at back for optimised levels of airflow and heat exchange.
• Co-injected for strength and structure, the exclusive TPU and rubber compound panels provide superb levels of grip contact, durability and heat resistance.
• The contoured calf protector ergonomically wraps around the rear leg and is constructed from a dual density compound rear blade system to offer progressive dampening of excessive torsional forces.
• Shin plate features a new anatomic design for reduced surface area and weight-saving.
• Completely re-designed sole with proprietary grip sculpturing to improve foot-peg performance, grip and mud and water run-off. Exclusive dual compound sole is seamlessly integrated to the multi-density foot base structure with built-in support. The sole offers superior durability, grip and feel while riding, and improved performance on the shifter.
Key Features
• Innovative, lightweight upper combines advanced lightweight microfiber with an impact and abrasion resistant TPU shell.
• The foot shell features five different compounds in a single lightweight piece to offer strength while maintaining flexibility and structural integrity. The foot shell incorporates heel and toe protection and is highly resistant against abrasion and impact while adding to the boot’s overall durability. The foot shell also includes an integrated shank for support and structural integrity.
• Frontal protection features a dual closure system with an internal microfiber flap, plus hook and loop fasteners for a precise fit closure attached securely with a micro-adjustable, easy to operate, lightweight buckle.
• The shin incorporates a unique TPU blade system engineered to prevent frontal hyper-extension and offer greater flex control.
• Soft microfiber gaiter helps seal out excessive water and dirt entry, while the 3D mesh lining ensures improved air circulation and comfort.
• 3D mesh lining incorporates anti-sliding suede on heel area to keep the foot located inside the boot.
• Highly ventilated perforated padding for optimised ventilation and airflow.
• Perforated footbed for additional cooling.
• The central sole insert features a micro grip and side hooking grip design. It is easily replaceable and Alpinestars offers a full sole replacement and boot repair service.
Protection
• Built into the Tech 10’s unique and lightweight single-piece co-injected foot chassis is the patented Dynamic Heel Compression Protector (DHCP), an innovative safety feature which includes a fully integrated collapsible heel area with expanded polyfoam to absorb high impact energies during a crash. DCHP features a directional impact protection system which significantly reduces the effect of excessive, potentially injury-causing energy being transferred to the ankle and lower leg. DHCP has been developed and tested in the demanding circuits of professional Supercross and Motocross.
• New performance double pivot motion control system features: - Medial and lateral double pivot system for improved levels of flexibility and precision control.- Engineered bi-density front flexion control is strategically positioned over the mesh area, combined with a dual front blade system and shock absorber insert to offer mechanical progressive force release to dampen and absorb impact energies.- Re-designed dual density TPU rear blade system is engineered to prevent hyper-extension while offering improved flex control and impact resistance.
• Evolutionary new shin plate design with ventilation windows strategically positioned to allow more ventilation without compromising the impact protection.
• 3D Higher Spring insole creates an effective cooling system using air channels within the sole for optimal levels of ventilation, while also creating a cushioning effect for enhanced levels of comfort.
• According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: CE EN13634.
The benchmark boot in Motocross, the Tech 10 Supervented boot further advances the innovations that make it the most technical motocross boot ever. Featuring two inlet ports on the front, a ventilated shin plate, perforated padding and extensive mesh sections, the Tech 10 Supervented has been designed for maximum airflow through the boot’s front and effective heat exchange. The new mesh inner bootie boasts a 3D Higher Spring insole which uses air channels within the sole for optimal levels of ventilation, while also creating a cushioning effect for enhanced levels of comfort. There is also a new sole with an extended honeycomb design for superior grip and feel on the bike’s pegs, especially in wet and muddy conditions.
Construction
• Construction uses a highly breathable, perforated microfiber.
• TPU features is combined with ventilation zones and a new air flow system sole for breathability and superior ventilation.
• Two large inlet ports on front of boot with exhausts at back for optimised levels of airflow and heat exchange.
• Co-injected for strength and structure, the exclusive TPU and rubber compound panels provide superb levels of grip contact, durability and heat resistance.
• The contoured calf protector ergonomically wraps around the rear leg and is constructed from a dual density compound rear blade system to offer progressive dampening of excessive torsional forces.
• Shin plate features a new anatomic design for reduced surface area and weight-saving.
• Completely re-designed sole with proprietary grip sculpturing to improve foot-peg performance, grip and mud and water run-off. Exclusive dual compound sole is seamlessly integrated to the multi-density foot base structure with built-in support. The sole offers superior durability, grip and feel while riding, and improved performance on the shifter.
Key Features
• Innovative, lightweight upper combines advanced lightweight microfiber with an impact and abrasion resistant TPU shell.
• The foot shell features five different compounds in a single lightweight piece to offer strength while maintaining flexibility and structural integrity. The foot shell incorporates heel and toe protection and is highly resistant against abrasion and impact while adding to the boot’s overall durability. The foot shell also includes an integrated shank for support and structural integrity.
• Frontal protection features a dual closure system with an internal microfiber flap, plus hook and loop fasteners for a precise fit closure attached securely with a micro-adjustable, easy to operate, lightweight buckle.
• The shin incorporates a unique TPU blade system engineered to prevent frontal hyper-extension and offer greater flex control.
• Soft microfiber gaiter helps seal out excessive water and dirt entry, while the 3D mesh lining ensures improved air circulation and comfort.
• 3D mesh lining incorporates anti-sliding suede on heel area to keep the foot located inside the boot.
• Highly ventilated perforated padding for optimised ventilation and airflow.
• Perforated footbed for additional cooling.
• The central sole insert features a micro grip and side hooking grip design. It is easily replaceable and Alpinestars offers a full sole replacement and boot repair service.
Protection
• Built into the Tech 10’s unique and lightweight single-piece co-injected foot chassis is the patented Dynamic Heel Compression Protector (DHCP), an innovative safety feature which includes a fully integrated collapsible heel area with expanded polyfoam to absorb high impact energies during a crash. DCHP features a directional impact protection system which significantly reduces the effect of excessive, potentially injury-causing energy being transferred to the ankle and lower leg. DHCP has been developed and tested in the demanding circuits of professional Supercross and Motocross.
• New performance double pivot motion control system features: - Medial and lateral double pivot system for improved levels of flexibility and precision control.- Engineered bi-density front flexion control is strategically positioned over the mesh area, combined with a dual front blade system and shock absorber insert to offer mechanical progressive force release to dampen and absorb impact energies.- Re-designed dual density TPU rear blade system is engineered to prevent hyper-extension while offering improved flex control and impact resistance.
• Evolutionary new shin plate design with ventilation windows strategically positioned to allow more ventilation without compromising the impact protection.
• 3D Higher Spring insole creates an effective cooling system using air channels within the sole for optimal levels of ventilation, while also creating a cushioning effect for enhanced levels of comfort.
• According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: CE EN13634.